Types of plastic crates

Industry News, 09-20-2022

For turnover boxes, and their plastic turnover boxes, what types are they generally? What are the precautions for each of the above?

In terms of common types of turnover boxes and plastic turnover boxes, there are generally four types: general-purpose stackable type, oblique insertion type, telescopic type and folding type.

Universal stackable: It is a common stackable plastic turnover box, and its specific advantage is that several shells can be stacked flexibly.

Oblique insertion type: Its primary advantage is that it can effectively reduce the total area occupied and reduce costs. Moreover, it is possible to stack several shells, but only by applying the corresponding cover.
Telescopic type: This type integrates the advantages of the basic type and the oblique insertion type. It can not only stack flexibly, but also complete the stacking and stacking of empty cabinets.

Folding type: On empty cabinets, it can not only reduce the total area but also reduce the cost, so it is a good turnover box.

How about the plastic turnover box, its preparation, etc.?

Plastic turnover boxes, which are actually equipped, are mainly:

The outer cover of the turnover box: Generally, the flip type and its flat cover can be used.

Plastic turnover box material: Low-voltage polyethylene and polypropylene that can resist high impact strength, namely HDPE and PP raw materials, should be used for injection molding.

Types of plastic turnover boxes: Generally, if they are classified according to their characteristics, plastic turnover boxes can be divided into two types: anti-static and non-anti-static.

What should be paid attention to in the whole process of application of plastic turnover box to prevent interference with its service life?

Common problem 1: On the plastic turnover box, when storing objects, the ambient temperature should be maintained at around 40 °C, so as to achieve good practical results.

Common problem 2: The crates of the turnover box can be deposited in layers, but the number of superimposed layers should be determined according to the net weight of the turnover box. It should not be too high to prevent risks and damage the plastic turnover box. It directly affects its service life and directly affects its normal application.

SHARE CONTENT