The numbered ear tags manufacturer will show you: the method of ear tagging

Company News, 03-17-2023

The numbered ear tags manufacturer tells you that the ear tag consists of two parts: the main tag and the auxiliary tag; the main tag is composed of the main tag ear tag face, the ear tag neck, and the ear tag head; the back of the main tag ear tag face is connected to the ear tag neck, numbered The ear tags manufacturer tells you that the ear tag head penetrates the animal's ear, embeds the auxiliary tag, fixes the ear tag, and leaves the ear tag neck in the perforation. Encoding information is posted on the ear tag surface.

The numbered ear tags manufacturer tells you that there are two types of ear tags: round and long. The numbered ear tags manufacturer tells you that the latter is to mark the number on the metal ear tag first, and then use the ear tag pliers to clamp the ear tag at the appropriate place on the upper edge of the cow's ear. When clamping the ear tag, be careful not to press the ear tag against the edge of the cow's ear, so as to avoid necrosis of the pressed part, which may cause the ear tag to fall off. The manufacturer of numbered ear tags tells you that when you wear ear tags to calves, you should leave a proper gap to prepare for growth.
How to mark ear tags: The numbered ear tags manufacturer tells you to disinfect before use. Put the male tag with nails on the needle of the ear tag pliers, and put the female tag in the slot of the ear tag pliers. The manufacturer of numbered ear tags tells you to proofread before the ears are punched. The tip of the male tag is aligned with the hole of the female tag, and then the animal's ear can be requested. Once you have hit it, just close the pliers together.

SHARE CONTENT